Programmable Outputs - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
12
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x

Programmable outputs

In each control unit are four programmable voltage outputs (S0-S3)
and two programmable relay outputs (R0-R1) available. 8 relays
expansion boards (4581) can be mounted in each EBL512 G3. See
chapter "Expansion boards 458x", page 27. On the COM loops can be
connected Addressable Multipurpose I/O units (3361) with two
programmable relay outputs (Re0-Re1) per unit and Addressable 2
voltage outputs units (3364).
Addressable sounder base (3379) can also be connected on the COM
loops, i.e. these units have no physical outputs, only the siren and
sounder respectively.
Each output is programmed via Win512 version 2.7.x, see dialog
boxes below.
Figure 11. Win512 version 2.7.x Control unit Voltage Output
and Relay Output dialog boxes.
Each 3377 and 3379 unit is programmed via Win512 version 2.7.x,
see dialog box below.
Figure 12. Win512 version 2.7.x "Addressable siren 3377"
dialog box. The dialog box for "Addressable sounder base
3379" is similar.
Addressable siren (3377) and
64