Mitsubishi Electric MELSECQ Series User Manual page 120

6 UTILITY PACKAGE (GX Configurator-PT)
6 - 15
Downloaded from ManualsNet.com
[Explanation of items]
(1) Setting item list
Setting item
Error status
Warning status
Axis #1 Current Feed Value
Axis #1 Current Speed
Axis #1 Axis Operation Status
Axis #1 Axis Error Code
Axis #1 Axis Warning Code
Axis #1 Executing Positioning Data No.
Axis #n Current Feed Value
Axis #n Current Speed
Axis #n Axis Operation Status
Axis #n Axis Error Code
Axis #n Axis Warning Code
Axis #n Executing Positioning Data No.
(2) Items
Module side Buffer
size
Module side Transfer
word count
Transfer direction
PLC side Device
(3) Command button
Make text file
End setup
Cancel
POINTS
• The auto refresh settings are stored in an intelligent function module parameter
file.
The auto refresh settings become effective by turning the power OFF and then
ON or resetting the CPU module after writing the intelligent function module
parameters to the CPU module.
• The auto refresh settings cannot be changed from sequence programs.
However, processing equivalent to auto refresh can be added using the
FROM/TO instruction in the sequence program.
search engine
to
: Displays the buffer memory size of the setting item.
: Displays the number of words to be transferred.
: " " indicates that data are written from the
programmable controller CPU to the buffer memory.
" " indicates that data are loaded from the buffer
memory to the programmable controller CPU.
: Enter a CPU module side device that is to be
automatically refreshed.
Applicable devices are X, Y, M, L, B, T, C, ST, D, W, R,
and ZR.
When using bit devices X, Y, M, L or B, set a number
that can be divided by 16 points (examples: X10, Y120,
M16, etc.)
Also, buffer memory data are stored in a 16-point area,
starting from the specified device number. For example,
if X10 is entered, data are stored in X10 to X1F.
Creates a file containing the screen data in text file format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
MELSEC-Q
n indicates the axis No.
QD70P4: 1 to 4 QD70P8: 1 to 8
6 - 15