11. Batch Data Positioning Mode - Tbl Instruction; Instruction Format - Mitsubishi Electric FX3S Series User Manual

FX /FX /FX
3S 3G 3GC
Built-in Positioning Functions

11. Batch Data Positioning Mode - TBL Instruction

If GX Works2, for example, is used, the positioning instructions shown below can first be set in the positioning
tables. After that, when a table is specified, the positioning operation of the specified table will be performed.
The FX
Instruction
DVIT
PLSV(FNC157)
DRVI(FNC158)
DRVA(FNC159)
*1.
11.1

Instruction Format

1. Instruction Format
FNC 152
D
TABLE
Command
input
2. Data setting
Operand type
3. Devices
Operand
type
D
n
1 : Specify Y000, Y001, or Y002
*1.
*2.
*3.
Point:
• To use an FX
special adapter.
• Differential line drive type outputs will be used for the outputs of the high-speed output special adapter.
B - 150
Downloaded from ManualsNet.com
/FX /FX PLC User's Manual - Positioning Control Edition
3U 3UC
PLC does not support TBL instruction.
3S
*1
One-speed interrupt constant quantity feed (Interrupt positioning)
(FNC151)
Variable speed operation (Variable Speed Pulse Output)
1-speed
positioning
Only available for and
FX
3U
16-bit
instruction
TBL
FNC152
D n
DTBL
Specifies the pulse output number.
D
n Specifies the table number (1 to 100) to be executed.
Bit device
System user
X Y M T C S D.b KnX KnY KnM KnS T C D R U\G V Z Modify K H

1
*3
Y003 from a high-speed output special adapter
Y002 is not available in FX
High-speed output special adapters can be connected only to the
To use Y002 and Y003 with a high-speed output special adapter, connect a second high-speed output
special adapter.
PLC of relay output type or triac output type, be sure to connect a high-speed output
3U
search engine
Description
Drive to Increment
Drive to Absolute
PLCs.
FX
3UC
Instruction
Execution condition
symbol
-
-
Description
Word device
Digit designation System user
*1
transistor output from the main unit, or specify Y000, Y001, Y002
*2
.
PLC (14-point and 24-point type) and FX
3G
11 Batch Data Positioning Mode - TBL Instruction
11.1 Instruction Format
32-bit
Instruction
Execution condition
instruction
symbol
DTBL
17 steps
-
Real
Con-
Special
Index num-
unit
stant
 
PLC.
3GC
PLC.
FX
3U
Continuous
execution
type
Data type
Bit
BIN 32-bit
Others
Char-
acter Pointer
ber string
E "" P
*3
, or