Mitsubishi Electric KD Series User Manual page 12

This product is designed to comply with EMC Directive 2004/108/EC of EU legislation.
However, to be compliant, 5V and 24V power cables have to be 2m or less, and also in order
to reduce the noise emission from the cables, the cables must attach the ferrite cores, as
described below.
Moreover, this product is designed as an embedded module. When this product shall be
installed to the other equipment, the equipment has to be compliant with the necessary
regulation and directives.
This product is in conformity with the following EMC directives and standards.
EMC directives
Applicable standards
Category of ISM equipment by EN55011: Comply with Group 1, Class A test standard
Class A equipment is regulated to be used under industrial environment. It could be potentially
difficult to assure the electromagnetic compatibility under other environment. Refer to EN55011
standards for further details.
TM-XG537C
1-3 CE marking
2004/108/EC
Immunity
Emission
EN 61000-6-2 ： 2005
EN 61000-6-4 ： 2007
COPYRIGHT © 2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
12