Mitsubishi Electric KD Series User Manual page 62

5-2 Procedure of function settings
5-2-1 Procedure of function settings
H/W setup
Status confirmation
Sending initial setting
Input synchronization signal
⑦ Dark correction
⑧ LED control (ON)
⑨ White correction
⑩ PGA
⑪ γ correction
Start data output
TM-XG537C
① Select baud rate
② Select output CLK frequency
③ Select output format
④ Select resolution
⑤ Select synchronization
mode (Internal/External)
⑥ Select control mode
※ When conducting Dark/White
correction, input external sync.
signal continuously, or conduct
with internal sync. mode.
※ MX-NL series output the
illumination emission sync.
trigger signal externally
COPYRIGHT © 2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
【 Procedure of function settings 】
1) This product contains several image processing
functions that can be controlled through Camera
Link® I/F in order to arrange several settings
accommodating your application.
2) Follow the procedure of several function settings is
described on the left chart.
① Select Baud rate
② Select output CLK frequency
③ Select output format
④ Select resolution
⑤ Select synchronization mode
⑥ Select control mode
⑦ Dark correction
⑧ LED control
(* Trigger signal output control for MX-NL series)
⑨ White correction
⑩ PGA
⑪ γ correction
3) This product is recommended to control some
functions (such as White and Dark corrections) while
monitoring a time-dependent output-change in a
continuous operation.
For details, refer to Appendix A "To get a better image data".
4) It is also available to store the setting which big
amount of transfer necessary. See technical
specification for further detail.
[Remarks]
- When conducting Dark/White correction, input external
sync. signal continuously, or conduct with internal sync.
mode.
- Generate data for each scan when conducting
Dark/White correction.
62