Tools And Materials Required - Toshiba Aquilion TSX-101A/I Series Site Planning Manual

7.4.1.1

Tools and materials required

Tools or materials required
Plastic L-angle plates (20 × 20 × 1830 mm)
(1)
(2) Adhesive tape (product number 252,
18 mm × 35 m)
(3) Cutter
(4) Saw
(5) Basin (60 cm in diameter) or bucket
(6) Ladle
(7) Caulking compound (joint sealant)
Silicone sealant Cemedine 8060 clear
(8) Caulking gun
(9) Tape measure
(10) Spatula
(11) Epoxy resin (Epichlon 830)
(12) Diluted solution (Epichlon 520)
(13) Winter-use hardener (Epichlon B-065)
(14) Rags
(15) Grinder
(16) Technodisk (external diameter 100 mm)
Plastic sheet (2 m × 2 m)
(17)
(18) Spray lubricant (CRC-556)
(19) Electric mixer (BMV-150A) manufactured by
Toshiba
<Supplier of the epoxy resin>
Epoxy resin, diluent, and curing agent: Dainippon Ink and Chemicals, Inc.
CAUTION: Although two different hardeners are available for the epoxy resin (winter-use
hardener and summer-use hardener), the winter-use hardener must be used.
The summer-use hardener is not suitable for work in hospitals or clinics
because it requires a long hardening time and, in some cases, the application of
heat may be necessary to achieve hardening.
Quantity
12 Used for the frames for applying
epoxy resin (reusable)
4 rolls Used to fix the plastic L-angle plates.
2 Used to remove the floor covering
1 Used to cut the plastic L-angle plates.
1 Used for mixing epoxy resin.
1 Used for mixing epoxy resin.
1 Used to prevent leakage of the epoxy
resin.
1 Used to apply caulking compound
2 Used to measure dimensions and to
draw lines.
1 For caulking
1 can 18 liters/can
1 can 18 liters/can
1 can 18 liters/can
1 bundle
1
1
1
1 Used for epoxy resin finishing
1 It is recommended that an electric
mixer be used to mix the resin.
23
No. 2A201-519EN*A
Remarks