Toshiba Aquilion TSX-101A/I Series Site Planning Manual page 46

Signal cables (2/2)
Cable Wiring Connected Connected
No. pit to: (1) to: (2)
S05 S Console Gantry
REC BOX
S06 S Console Gantry
REC BOX
Cables attached to the gantry
Cable Wiring Connected Connected
No. pit to: (1) to: (2)
FCS12 S Gantry Patient
couch
FCP40 P Gantry Patient
couch
FCE01 E Gantry Patient
couch
FCS46 S Gantry Foot-SW
Table 8-1 List of inter-unit cables (3/3)
Standard Effective Retract length
length (m) length (m) (m)
14 11 0.5 while
connecting to (1)
1.5 while
connecting to (2)
14 11 0.5 while
connecting to (1)
1.5 while
connecting to (2)
Standard Effective Retract length
length (m) length (m) (m)
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
⎯ ⎯ ⎯
Number of cores ×
Maximum
2
length (m)
section area (mm )
19 2-pairs, optical
fiber
19 2-pairs, optical
fiber
Number of cores ×
Maximum Outer cable
2
length (m) diameter (mm)
section area (mm )
⎯ 25TP × 0.08
shielding
⎯ 2 cores × 0.75
3 cores × 2.0
4 cores × 0.5
⎯ 1 core × 8.4
⎯ 5TP × 0.08
shielding
46
No. 2A201-519EN*A
Outer cable Connector diameter
diameter (mm)
(mm)
Connector (22 × 8 × 25)
11
11 Connector (22 × 8 × 25)
Connector diameter (mm)
Connector (73 × 19 × 47)
8.1
while connecting to (2)
6.1 Connector (28 × 33 × 28)
Compound cable
6.2
9.9
7.8 Solderless contact while
connecting to (2)
7.2 Connector (φ29 × 52) while
connecting to (2)
Remarks
Minimum
permissible
bending
radius:
110 mm
Minimum
permissible
bending
radius:
110 mm
Remarks
(1)
connected
inside gantry
(1)
connected
inside gantry
Compound
cable
(1)
connected
inside gantry
(1)
connected
inside gantry