Advertisement
5. BIOS Configuration Utility
5. BIOS Configuration Utility
At system bootup, the ASUS PCI-DA2100 BIOS displays the following message:
ASUS PCI-DA2000 Series (PCI-TO-SCSI RAID) BIOS v1.11
PCI Bus # = 00 Device # = 0B Port = E800 IRQ = 12 EDORAM=4 MB FW=1.11
!! Press <Ctrl><I> for Configuration Utility, <Q> to Skip !!
NOTES :
PCI Bus #, Device #:
Show the PCI bus and PCI device number been assigned to ASUS PCI-DA2100.
The numbers are in hexadecimal.
Port:
Show the I/O port base address been assigned to ASUS PCI-DA2100.
IRQ:
Show the Interrupt level been assigned to ASUS PCI-DA2100. The level is in deci-
mal.
EDO RAM DRAM:
Displays the cache RAM type and size been installed on ASUS PCI-DA2100.
F/W:
Show the firmware version of ASUS PCI-DA2100.
ASUS PCI-DA2100 BIOS waits 3 seconds for a keystroke. You can press [Ctrl-I]
to enter the configuration utility, or press Q to skip waiting for a keystroke.
If [Ctrl-I] is pressed to enter configuration utility, the main menu will appear. There
are two functions in the main menu: Configuration and Color/Monochrome.
5.1.
Configuration
There are four functions in the Configuration Option: Configure BIOS, Configure
Card, Configure SCSI and Reset to Defaults.
ASUS PCI-DA2100 User's Manual
9
Advertisement
