Advertisement
5. Windows NT Driver Installation
5. Windows NT Driver Installation
Up to 4 ASUS PCI-DA2000 Series adapters can be installed in one computer. The
following files are supplied for driver installation, to be found in the subdirectory
\WINNT\V3_1 for Windows NT 3.1.
-DA2000.SYS:
-PCIDA:
-OEMSETUP.INF:
-TXTSETUP.OEM:
The following files are supplied for driver installation, they are put in the
\WINNT\V3_5X subdirectory for Windows NT 3.5X.
-DA2000.SYS:
-PCIDA:
-OEMSETUP.INF:
-TXTSETUP.OEM:
5.1.
Installing Windows NT
Follow these steps only if Windows NT is not installed on your computer or if you
are upgrading to new version of Windows NT.
1 Use ASUS PCI-DA2000 Series BIOS Configuration Utility to disable ISA Mail-
box Emulation mode (default is disabled). To do this, at system bootup, press
[Ctrl-I], select Configure Card option, then change IO Port Address to DIS-
ABLED.
2 Use ASUS Text RAID Manager or RS-232 Terminal Interface Operation to con-
figure Logical Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs.
Note that SCSI ID 7 is reserved for the ASUS PCI-DA2000 Series adapter
and thus no logical drives or devices should be mapped to this SCSI ID.
3 Prepare for the installation by using DISKCOPY (or any other disk-copy utility)
to make backup copy of ASUS PCI-DA2000 Series distribution diskette. If you
are installing Windows NT 3.1, copy all files from \WINNT\V3_1 to root direc-
tory of the backup diskette. If you are installing Windows NT 3.5x, copy all
files from \WINNT\V3_5X to root directory of the backup diskette. Use the
backup copy as your working diskette.
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
PCI-DA2000 Series Miniport Driver for Windows NT 3.1
PCI Disk Array Tag File
Information file for driver installation
Information file for driver installation
PCI-DA2000 Series Miniport Driver for Windows NT 3.5x
PCI Disk Array Tag File
Information file for driver installation
Information file for driver installation
57
Advertisement
