Advertisement
6. Troubleshooting
6. Troubleshooting
NOTE: Following is a check list for problems commonly encountered during
installation. For failures that occur during operation, refer to the failure recov-
ery procedure.
PROBLEM
7-segment is off or not flashing
SCSI channel failure detected
upon start-up with SCSI cables
connected.
Buzzer with continuous beeps
Initialization failure
Cannot detect SCSI drive
BIOS show no drive connection
Logical drive failure detected
during boot-up
System is not stable after
running a period of time
ASUS PCI-DA2100 User's Manual
CHECK
1 PCI slot contact quality.
2 Minimum of 2MB DRAM SIMM
installed.
1 ID numbers (must be unique for each
device on the same SCSI channel).
2 Terminators are properly installed.
1 ID numbers (must be unique for each
device on the same SCSI channel).
2 Terminators are properly installed.
1 Drive power connections.
2 Drive SCSI cable connections.
3 ID numbers (must be unique for each
device on the same SCSI channel).
1 SCSI port to LUN assignment.
2 Logical drive mapping to LUN.
1 Proper installation or connection of one or
more of the drives (use the "View SCSI
drives" function to help locate the problem).
1 SCSI cable is no more than 2 meters.
2 Terminators are properly installed.
3 Power supply voltage is within the specifi-
cation.
13
Advertisement
