Advertisement
2. RAID Manager & Interface
2 Type Q or use the
3 Use the keys to select a RAID level and press [Enter].
4 If a fault-tolerant RAID level has been selected, drive parity initialization will
be performed at this point. A progress indicator similar to the one shown below
will be displayed. When initialization is complete, the controller will automati-
cally map the entire capacity of the logical drive to SCSI ID 0 LUN 0.
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
keys to select "Quick installation" and press [Enter].
< RAID Level >
RAID 5
RAID 5 + Spare
RAID 3
RAID 3 + Spare
RAID 1
RAID 1 + Spare
RAID 0
NRAID
Creating RAID
87 % Complete
27
Advertisement
