Advertisement
6. Windows 95 Driver Installation
10 Click on the "Have Disk" button and enter a:\win95 as the subdirectory to copy
the manufacturer's file from. Insert ASUS PCI-DA2000 Series distribution dis-
kette into drive A: and click on "OK".
11 Select "ASUS DA-2000 Series PCI-to-SCSI RAID Adapter", and click on "OK".
12 Click on "OK". The driver is copied.
13 When asked to remove ROM BIOS of ASUS PCI-DA2000 Series Controller,
you MUST click on "Cancel" to keep ROM BIOS.
14 You must restart your system for the changes to take effect. Click on "Yes" to
shutdown the system and restart your computer.
15 When the system is booting up, an "Unknown Device" warning window will be
displayed, this is a normal behavior because a virtual target is registered by
ASUS PCI-DA2000 Series family Miniport Driver to support ASUS GUI RAID
Manager. Please select "Do not install a driver" , and click on "OK".
16 Make sure that the ASUS PCI-DA2000 Series family Miniport Driver is work-
ing properly by using Device Manager tab of System icon in Control Panel.
Click on the plus sign next to the SCSI controllers icon, and double-click on the
Infortrend ASUS PCI-DA2000 Series PCI-to-SCSI RAID Adapter icon. Check
the Device status. If the device is working properly, the driver is installed suc-
cessfully. If not, the driver is not installed. Check your CONFIG.SYS to see if
I2DOSASP.SYS is installed. If it is installed, remove it, and restart your com-
puter.
62
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
Advertisement
