Advertisement
7. OS/2 Driver Installation
/(!)DM:i1,i2,i3... OR /(!)DM:(i1,l1),(i2,l2)....
(Disable) Enable Direct Access Storage Device (DASD) Manager Support. Where
i1,i2,i3 is the specified SCSI Target ID. (i1,l1),(i2,l2) is the specified SCSI Target
ID-LUN. (Disable) Enable the specified SCSI Target ID(LUN) of the adapter speci-
fied by /A:n, to be supported by the IBM-supplied DASD manager
(OS2DASD.DMD). The default setting is /DM. The boot device MUST be sup-
ported by DASD Manager, or the computer can not be able to boot OS/2.
/(!)SM:i1,i2,i3... OR /(!)SM:(i1,l1),(i2,l2)....
(Disable) Enable SCSI Manager Support. Where i1,i2,i3 is the specified SCSI Tar-
get ID. (i1,l1),(i2,l2) is the specified SCSI Target ID-LUN. (Disable) Enable the
specified SCSI Target ID(LUN) of the adapter specified by /A:n, to be supported by
the IBM-supplied SCSI manager (OS2SCSI.DMD). The default setting is /SM.
Note : The driver will find all the ASUS PCI-DA2000 Series controller in your
computer automatically, if no /BUS and /DEV options specified.
68
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
Advertisement
