Advertisement
7. OS/2 Driver Installation
7.4. OS/2 Driver Command-Line Options
1 Driver Command Syntax :
BASEDEV=DA2000.ADD [Driver-Options][Adapter-Options][Unit-Options]
The command and options must be put in the CONFIG.SYS file. The changes of
command-line option will not take effect until the system is restarted.
2 Command-Line Options :
1) Command-line options are case-insensitive.
2) All command-line options begin with the slash character (/).
3) The exclamation character (!) is a negation operator; that is, it negates the
option that follows it.
3 Driver-Options :
/V
Verbose. Either Display the driver name, version number, date, adapter Information
and device information if the driver loads successfully, or display error messages if
the driver fails to initialize.
/(!)ET
(Disable) Enable Embedded Target Support. Makes the driver (disable) enable not-
zero SCSI LUN support. Default setting is /ET.
/PCI:n
Maximum PCI Bus Number in the computer. Where n is a decimal value between 0
to 255. Default value is 255.
66
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
Advertisement
