Advertisement
A. Text RAID Manager / RS-232
Terminal Operation Command Reference
Quick Installation
View and edit logical drives
View scsi drives
Add stand-by drives
Delete logical drive
Partition logical drive
view and edit scsi id Map
view and edit scsi drives
Scan new scsi drive
Rebuild logical drive
view and Edit scsi channels
scsi Id
scsi Terminator
Sync transfer clock
Wide transfer
system Functions
Mute Beeper
Write Back Cache
Scsi Motor Spin-Up
Scsi Reset at Power-Up
Monitor Port Baud-Rate
Total Cache Size
Firmware Version
Bootrecord Version
Serial Number
CPU Type 80486SX-33
Change Password
Modem Control
Reset Controller
Controller Maintenance
NOTE: RS-232 Terminal Operation is not available on the ASUS PCI DA-2100.
72
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
Quick Set-Up Function
View drives assigned to a logical drive.
Assign a spare drive to a logical drive.
Delete a logical drive.
Divide a logical drive into up to 8
partitions.
View and edit scsi id Map
View and edit available drives
Include a newly installed drive into an
existing list.
Initiate data rebuilding.
View and edit available SCSI channels
Set SCSI channel ID number.
Enable or disable SCSI channel active
termination.
Change Sync transfer clock
Enable or disable wide transfer
Turn beeper off.
Enable or disable write back caching.
Enable or disable the staggered spin-up
of connected drives.
Enable or disable reset of SCSI channels
during power-up.
Set serial port baud rate.
Display the total cache size
Display the firmware version
Display the bootrecord version
Display the controller serial number
Display the CPU type
Set or change password.
Set up modem parameters.
Reset the controller
Download/Upload controller Firmware
through the Text RAID Manager.
Advertisement
