Setting Communications Parameters; Setting Access Control Parameters - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
No.
6
----End
Follow-up Procedure
After you have completed the teamwork settings, check that the teamwork
networking is successful by performing the following steps:
1.
2.
3.
4.

5.5.4 Setting Communications Parameters

5.5.4.1 Setting Access Control Parameters

Path: Settings > Comm Settings > Access Control
Issue 06 (2022-12-15)
Item
Background color:
red/bright gray
NO TE
If the teamwork networking is successful, the teamwork icon is green. If the teamwork
networking fails, the teamwork icon is red. If the teamwork networking is disabled, the
teamwork icon is gray.
Check whether the number of devices in the topology is the same as the
actual number of devices.
– If yes, go to 2.
– If no, check the cable connection and the teamwork settings.
Check whether the number of running devices in the topology is the same as
the actual number of devices.
– If yes, go to 3.
– If no, check the cable connection and the teamwork settings.
Check whether the number of standby devices in the topology is the same as
the actual number of devices.
– If yes, go to 4.
– If no, check the cable connection and the teamwork settings.
Check whether the number of online devices in the topology is the same as
the actual number of devices.
– If yes, the check is complete. The teamwork settings are correct.
– If no, check the cable connection and the teamwork settings.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Note
● Red indicates that the unit has generated a
critical alarm, as shown in
● Bright gray indicates that the device is
operating without any critical alarms.
5 Power-On Commissioning
.
113