Huawei NetCol5000-C030 User Manual page 131

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
●
Initial Startup
After factory settings are restored, startup verification is required.
Step 1 Tap Start on the home screen to enter the initial startup screen. Tap OK to enter
the startup authorization screen.
Figure 5-14 Startup authorization
Step 2 Contact technical support engineers and notify them of the barcode and
verification code to obtain the service authorization code.
Step 3 Enter the startup password generated by the app in Authorization code on the
startup authorization screen to start the device.
----End
Non-initial Startup
Step 1 Tap Start on the home screen.
●
Issue 06 (2022-12-15)
If you choose Settings > System Settings > System Control and set
Password required for start or shutdown onsite to Yes, a password is
required for startup or shutdown. If you set Password required for start or
shutdown onsite to No, no password is required for startup or shutdown.
NO TICE
NO TE
The QR code shown in the preceding figure is used for scanning on the mobile app.
NO TE
Technical support engineers can obtain the service authorization code through the app. For
details, see the Data Center Facility Deployment Guide .
If the Password required for start or shutdown onsite function is enabled,
enter the login password to start the unit.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
122