Huawei NetCol5000-A050 User Manual page 139

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual (1350 mm Depth)
Parameter
Link mode
Client encryption
Server encryption
Encryption algorithm
CBC
NMS IP address
NMS port number
Pre-shared password
Issue 04 (2022-12-15)
Description
● Server: The smart cooling product works as the
● Client: The smart cooling product works as the
● Server and client: The smart cooling product works
This parameter is configurable when Link mode
involves Client.
NOTE
This parameter is configurable when Link mode
involves Server.
NOTE
Specifies whether to use the CBC encryption algorithm.
After the parameter setting is changed, the system
automatically restarts. Exercise caution with the setting.
Enter the actual IP address of the NMS. The IP
addresses of the display board, client NMS, and server
NMS must be unique.
This parameter is configurable when Link mode
involves Client.
This parameter is configurable when Link mode
involves Client.
● Connecting to the NetEco: Set this parameter to
● Connecting to other NMSs: You are advised not to
Secondary authentication password used for Modbus-
TCP connection.
Copyright © Huawei Digital Power Technologies Co., Ltd.
server and can connect to two clients for
communication.
client and can connect to a remote server for
communication.
as the server and can connect to two clients for
communication. It also works as the client and can
connect to a remote server for communication.
In the third-party NMS scenario, if the third-party NMS does
not have a certificate or does not support encryption, you are
advised to set this parameter to Disable for non-encrypted
connection. For security purposes, encryption is enabled by
default. You can configure encryption based on actual
requirements and security scenario evaluation.
In the third-party NMS scenario, if the third-party NMS does
not have a certificate or does not support encryption, you are
advised to set this parameter to Disable for non-encrypted
connection. For security purposes, encryption is enabled by
default. You can configure encryption based on actual
requirements and security scenario evaluation.
32907 if Client encryption is enabled, or set it to
32906 if Client encryption is disabled.
change the value. In special cases, set this
parameter based on the site requirements.
6 Power-On Commissioning
129