Toro TX 700 Operator's Manual page 27

Tx 700 narrow track compact tool carrier
Table of Contents

Advertisement

Maintenance Service
Interval
Every 50 hours
Every 100 hours
Every 250 hours
Every 400 hours
Every 500 hours
Every 1,500 hours or
2 years, whichever
comes first
Yearly or before storage
Every 2 years
Important:
Refer to your engine owner's manual for additional maintenance procedures.
Maintenance Procedure
• Check the battery condition.
• Check and adjust the track tension.
• Check the cooling system hoses.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Check for dirt buildup in the chassis.
• Change the engine oil and filter. (Service more frequently if conditions are extremely
dusty or sandy.)
• Replace the hydraulic filter.
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Replace the air filter.
• Replace the water separator filter.
• Replace the in-line fuel filter
• Change the engine coolant.
• Replace the alternator belt. (Refer to the engine owner's manual for instructions.)
• Change the hydraulic fluid.
• Replace all moving hydraulic hoses.
• Check and adjust the track tension.
• Touch up chipped paint.
• Drain and clean the fuel tank(s)—Authorized Service Dealer only.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

223512235222351g

Table of Contents