Closing the Hood
1.
Lift up on the tab securing the prop rod.
Figure 34
1. Prop-rod tab
2.
Lower the hood and secure it by pushing down
on the front of the hood until it locks in place.
3.
Use the latch key to secure the latch.
Removing the Rear Cover
1.
Remove the 2 side cushions.
Figure 35
1. Hex-washer head bolt—5/16 x 1/2 inch (5)
2.
Remove the rear cover.
1. Hex-washer head
g031216
bolt—3/8 x 1 inch (5)
3.
Loosen the hose clamp on the hose and
disconnect the hose from the cover.
1. Hose clamp
g367613
29
Figure 36
2. Hex-washer head
bolt—5/16 x 3/4 inch
(2)
Figure 37
g367612
g367611