Toro TX 700 Operator's Manual page 9

1. Fast
2. Slow
3. Traction disabled
4. Work light
1. Warning—read the Operator's Manual.
2. Warning—receive training before operating the machine.
3. Warning—wear hearing protection.
4. Warning—engage the parking brake, lower the attachment to
the ground, shut off the engine, and remove the key from the
ignition before leaving the machine.
5. Electrocution hazard, power lines—check for power lines in
the area before using the machine.
6. Crushing hazard—install the cylinder lock; read the Operator's
Manual before servicing or performing maintenance.
140-5791
5. Engine—start
6. Engine—run
7. Engine—shut off
145-0637
7. Cutting/severing hazard of hand or foot—wait for all moving
parts to stop before servicing; keep away from moving parts;
keep all guards and shields in place.
8. Explosion hazard; electrocution hazard—call the local utilities
hotline before beginning work in an area.
9. Crushing hazard—keep away from the attachment when
operating the machine; keep bystanders away from the
machine.
10. Tipping hazard—always move up or down slopes with
the attachment lowered; never drive on a slope with the
attachment raised; always operate with the heavy end uphill;
always carry loads low; never jerk the control levers; use
a steady, even motion.
11. Tipping hazard—do not make fast turns; always check behind
you before reversing the machine.
9
decal140-5791
decal145-0637