Brake Maintenance; Testing The Parking Brake - Toro TX 700 Operator's Manual

Checking the Engine-Coolant
Level
Service Interval: Before each use or daily—Check
the coolant level in the expansion
tank.
The cooling system is filled with a 50/50 solution of
water and permanent ethylene-glycol antifreeze.
1. Park the machine on a level surface, lower the
loader arms, engage the parking brake, and
shut off the engine.
2. Remove the key from the key switch and allow
the engine to cool.
3. Open the hood.
4. Check the coolant level in the expansion tank.
Note:
The coolant level should be at or above
the mark on the side of the tank.
Figure 67
1. Expansion tank
2. Full mark
5. If the coolant level is low, remove the expansion
tank cap and add a 50/50 mixture of water and
permanent ethylene-glycol antifreeze.
Important:
Do not overfill the expansion
tank.
6. Install the expansion-tank cap.
Changing the Engine Coolant
Service Interval: Every 500 hours
Have an Authorized Service Dealer change the engine
coolant yearly.
If you need to add engine coolant, refer to
the Engine-Coolant Level (page
g366894
Checking
45).
45

Brake Maintenance

Testing the Parking Brake

Service Interval: Before each use or daily
1. Engage the parking-brake; refer to
Parking-Brake Lever (page
2. Start the engine.
3. Slowly attempt to drive the machine forward or
rearward.
4. If the machine moves, contact your Authorized
Service Dealer for service.
14).