Connecting Water Pipes; Optional) Connecting The Humidifier Water Inlet Pipe - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
----End

3.10 Connecting Water Pipes

3.10.1 (Optional) Connecting the Humidifier Water Inlet Pipe

Context
This section applies only to models with humidifiers.
The water inlet pipe can be routed from the bottom or side. Determine the pipe
routing mode based on site conditions.
Procedure
Step 1 Install the rigid pipe conversion adapter to the water inlet pipe connector.
Step 2 Route the external water inlet pipe into the cabinet through the side plate or
bottom plate. Connect the external water inlet pipe to the rigid pipe conversion
adapter.
Figure 3-28 Connecting the water inlet pipe
Step 3 Secure water pipes using cable ties, and seal the pipe hole using firestop putty.
----End
Issue 04 (2022-11-25)
Figure 3-27 Bottom pipe routing
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 System Installation
55