NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
3.10.2 Connecting the Condensate Drainpipe
Context
The smart cooling product condensate drainpipe inside the cabinet can be routed
from the bottom or side. Determine the pipe routing mode based on site
conditions.
Procedure
Step 1 Install the rigid pipe conversion adapter to the drainpipe connector.
Step 2 Route the external drainpipe into the cabinet through the side plate or bottom
plate. Connect the external drainpipe to the rigid pipe conversion adapter.
Figure 3-29 Bottom pipe routing
Figure 3-30 Side pipe routing
Issue 04 (2022-11-25)
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 System Installation
56