Silvercrest SSMS 600 E6 Operating Instructions Manual page 10

Assembling
WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the first use, clean all parts as described in the chapter "Cleaning".
To assemble the hand blender
WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care at all times.
►
Place the hand blender 5 on the motor unit 4 so that the arrow
■
to the symbol
unit 4 points to the symbol
Assembling the wire whisk
Press the whisk q into the whisk holder 0, until it firmly engages.
■
Place the so assembled whisk q onto the motor block 4 so that the arrow
■
at the symbol
Assembling the shredder
WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care at all times.
►
Place the bowl 8 on a dry, level surface.
■
Place the blade 7 carefully onto the holder in the bowl 8. Turn the
■
blade 7 a little while doing this, so that it slips onto the holder.
NOTE
The blade 7 is not completely fixed to the holder. This is normal. The
►
blade 7 is only completely fixed when the bowl lid 6 has been put on.
Add the food you wish to chop into the bowl 8.
■
SSMS 600 E6
. Turn the hand blender 5 until the arrow
points to the symbol
.
.
. Turn the motor block 4 until the arrow
points
on the motor
points
GB │ IE │
7 ■