Memoskop C-E - Siemens SIREMOBIL Iso-C Troubleshooting Manual

Replacing boards and components

MEMOSKOP C-E

NOTE
NOTE
Replace the MEMOSKOP C-E. The attachment screws are on the underside of the
storage device.
Check the software status of the MEMOSKOP. Download the system software to the
MEMOSKOP if necessary.
Use the MEMOSKOP Service Software to import the language file.
Configure the MEMOSKOP C-E for the correct video frequency and the number of
monitors present. See
the video frequency / p. 77)
monitors / p.
Configure the following parameters in Technical Setup for the MEMOSKOP:
Number of Monitors
Hardcopy
Edge 1 coef set
Edge 2 coef set
Motion detection setup
Date / Time format
Keyboard
Display of realtime clock
Display of rotated images
Monitor zoom
Default LUT
© Siemens, 2008
For internal use only
Check the software
MEMOSKOP. If the software status of the MEMOSKOP differs
from that of the system, the system software status must be
downloaded to the MEMOSKOP. The MEMOSKOP software
status can be read out in the 2nd line of the User Setup. The
first number describes the MEMOSKOP type.
CE-100/ C/ C & MOD; 4=C-SUB/ C-SUB & MOD).
Read and record the parameters for MEMOSKOP C-E if you
are able to select User Setup. After replacing the Memoskop,
configure the MEMOSKOP C-E according to the parameters
recorded.
(MEMOSKOP C-E, keyboard emulation / p.
and (MEMOSKOP, configuration for the number of existing
77).
Configure 1 for SIREMOBIL with 1 monitor. Configure 2 for
SIREMOBIL with 2 monitors.
Check whether 5000 is programmed in "4 Max Hardcopy
time". If not, program this value.
Check whether 3 is programmed; if not, program this value.
Check whether 8 is programmed, If not, program this value.
Check whether the following are programmed - MD1:
Threshold 100 and at MD2: Threshold 120. If not, program
these values.
Set to country-specific format.
Set to the keyboard layout being used.
Configure Yes. Configure No only upon customer request.
Configure Yes.
Configure No.
Configure 2. Program a different LUT curve only upon cus-
tomer request.
SPR2-230.840.01.01.02
08.08
status of the
Page 105 of 148
CS PS SP
105
6.13
newly delivered
(2=CE; 3=
77), (Configuring
SIREMOBIL Iso-C