Siemens SIREMOBIL Iso-C Troubleshooting Manual page 21

Prerequisites
Loosen the 6 mounting screws
CAUTION
Expand the cover at the rear in the direction of the arrow
downwards.
If necessary, disconnect the ground wire, the keypad (brake buttons) cable, and the
emergency stop button cable.
Attaching the cover
Re-fasten or connect the ground wire, the keypad (brake buttons) cable, and the emer-
gency stop button cable.
CAUTION
Expand the cover at the rear far enough that, as shown in
obliquely over the horizontal carriage at the edge,
Press on the top surface of the cover, without grasping the sheet metal edges, until this
slides over the lower edge of the horizontal slide. Make sure that the cover does not
slide out from the edge
Check operation of the emergency stop button and of the brake buttons.
Fasten the cover with the 6 Allen screws
© Siemens, 2008
For internal use only
(1/Fig. 5 / p.
Danger of injury when dismantling/assembling mechanical
parts!
Non-compliance can lead to minor up to moderately severe
injuries, especially to the hands!
The horizontal carriage cover is bent in a U-shape and
must be pulled on the side toward the outside when it
is removed. The cover is then under mechanical
stress.
We recommend wearing light work gloves to avoid inju-
ries.
Danger of injury when dismantling/assembling mechanical
parts!
Non-compliance can lead to minor up to moderately severe
injuries, especially to the hands!
To attach the cover, press it into place. It is under
mechanical tension and snaps into place over the bot-
tom edge of the horizontal carriage.
Expand the cover at the rear far enough that, as shown
in (Fig. 6 / p.
carriage at the edge,
Press on the top surface of the cover, without grasping
the sheet metal edges, until this slides over the lower
edge of the horizontal slide.
(1/Fig. 6 / p. 20).
SPR2-230.840.01.01.02
08.08
20).
(Fig. 5 / p. 20)
20), it lies obliquely over the horizontal
(1/Fig. 6 / p.
(Fig. 6 / p.
(1/Fig. 6 / p. 20).
(1/Fig. 5 / p. 20).
Page 21 of 148
CS PS SP
21
and remove it
20).
20), it lies
SIREMOBIL Iso-C