Brother HL-L9300CDW Service Manual page 206

9.19 Laser Unit Flat Cable/Laser Unit
(1) Remove the six Taptite bind B M4x12 screws and four Taptite cup S M3x6 SR screws,
and remove the Scanner cover plate from the Main body.
Assembling Note:
When assembling the six screws of the Taptite bind B M4x12, be sure to assemble
them in the order shown in the figure.
Taptite cup S M3x6 SR
Taptite bind B M4x12
Scanner cover plate
Main body
(2) Disconnect the Laser unit flat cable from the Laser unit and release the wiring.
Laser unit flat cable
Harness routing: Refer to
Taptite cup S M3x6 SR
Taptite bind B M4x12
5
6
Laser unit
" Laser Unit"
Taptite bind
B M4x12
4
3
1
Fig. 3-74
Fig. 3-75
3-65
Taptite bind B M4x12
2
Taptite cup S
M3x6 SR
<Front side>
CN1
<Front side>
Confidential