Table of Contents
Advertisement
■
Adjusting left-end print start position on second side in duplex printing
<Function>
This function is to adjust the left-end print start position on the second side in the left and right
direction if it is displaced in duplex printing. The adjustable range is -100 to 750 (unit: 300 dpi)
(The minus direction means the left direction.)
<Operating procedure>
Model without touch panel
(1) Press the
"MAINTENANCE 45" on the LCD in the
initial state of the maintenance mode.
Then, press the OK key. "USBNo." is
displayed on the LCD.
(2) Press the
"DX.XAdjust" and then press the OK or
Go key. "DX.XAdjust=**" is displayed
on the LCD.
(3) To move the print start position to the
left, press the
value. To move the print start position to
the right, press the
the value.
(4) When the value is changed to the
adjustment value, press the OK or Go
key. "Accepted" is displayed on the
LCD, and the machine returns to the
initial state of the maintenance mode.
or
key to display
or
key to display
key and decrease the
key and increase
5-26
Model with touch panel
(1) Press the 4 and 5 keys in this order in
the initial state of the maintenance
mode. "USBNo." is displayed on the
LCD.
(2) Press the
or
"DX.XAdjust" and then press the Mono
or SET key. "DX.XAdjust=**" is
displayed on the LCD.
(3) To move the print start position to the
left, press the
key and decrease the
value. To move the print start position to
the right, press the
the value.
(4) When the value is changed to the
adjustment value, press the Mono or
SET key. "Accepted" is displayed on the
LCD, and the machine returns to the
initial state of the maintenance mode.
key to display
key and increase
Confidential
Advertisement
Table of Contents
Troubleshooting
