Brother HL-L9300CDW Service Manual page 348

2.2 Counter Reset of Consumable Parts
(Drum Unit/Belt Unit)
<Function>
After replacing a drum unit or belt unit, perform this function to increase the replacement count
by one and reset the count to clear the "Replace ***" warning.
<Operating procedure>
Model without touch panel
(1) Press the Go and
time. "Reset Menu" is displayed on the
LCD.
(2) Press the
part of which counter you want to reset
and press the OK key.
(3) " Reset
LCD and press the
is displayed on the LCD and the
counter of the selected part is reset.
The consumable parts that can be selected are shown in the table below.
LCD
Drum
Belt Unit
key at the same
or key to display the
Exit" is displayed on the
key. "Accepted"
Part name
Drum unit
Belt unit
5-60
Model with touch panel
(1) Press the Settings key in the ready
state.
(2) Press the or
"Machine Information" and then press
the Machine Information key.
(3) Press the or
Life" and then press the Parts Life key.
(4) Hold down the X key for 5 seconds or
more. "Reset Menu" is displayed on the
LCD.
(5) Press the key of the part of which
counter you want to reset. "Reset
*****?" is displayed on the LCD. (*******
represents the selected part name.)
(6) Press the Yes key. "Accepted" is
displayed on the LCD and the counter
of the selected part is reset.
key to display
key to display "Parts
Confidential