Brother HL-L9300CDW Service Manual page 59

Error Message
Upper line
Open the Back
Small paper
Cover and then
press [Retry].
Belt End Soon
Supplies
Drum End Soon.
Replace Belt
Replace Drum
Toner Low
WT Box End Soon
One or more Toner
Toner Error
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
Turn the power off
Too Many
and remove
Trays
additional trays.
Remove any
Touchscreen
material which is
initialization
on the
failed
touchscreen.
Middle line
The paper size which is not
supported by the output tray is
set for printing from the printer
driver.
Number of pages printed with the
belt unit will reach the upper limit
soon.
Number of the drum unit rotations
reaches the upper limit soon.
Number of pages printed with the
belt unit has reached the upper
limit.
Number of the drum unit rotations
has reached the upper limit.
Dot counter of the toner cartridge
(Black) or develop roller counter
reaches the upper limit soon.
Dot counter of the toner cartridge
(Cyan) or develop roller counter
reaches the upper limit soon.
Dot counter of the toner cartridge
(Magenta) or develop roller
counter reaches the upper limit
soon.
Dot counter of the toner cartridge
(Yellow) or develop roller counter
reaches the upper limit soon.
The waste toner sensor detected
that the waste toner box is almost
full.
The develop release sensor
detected the developer roller
disengagement or engagement
failure.
The number of option trays
higher than the specified one is
connected.
Error occurred during touch panel
initialization.
2-39
Error
State
Codes
8D02
4300
4000
4400
4200
4B01
4B04
4B03
4B02
4700
6E00
6D00
D800
Refer
to:
2-70
2-50
2-49
2-50
2-49
2-51
2-51
2-51
2-51
2-51
2-61
2-61
2-82
Confidential