Brother HL-L9300CDW Service Manual page 258

10.5 LT Relay PCB ASSY
(1) Disconnect all the Connectors from the LT relay PCB ASSY.
LT relay PCB ASSY
(2) Remove the Taptite cup S M3x6 SR screw and remove the LT relay PCB ASSY from the
LT frame L unit.
2b
Taptite cup S M3x6 SR
LT relay PCB ASSY
<Left side>
(LT paper
(Not used) edge sensor)
(LT solenoid)
Fig. 3-162
2a
LT frame L unit
Fig. 3-163
3-117
(LT plate-up
detection sensor)
(LT connector)
(LT plate-up motor)
Confidential