Brother HL-L9300CDW Service Manual page 54

Error Message
Upper line
Maintenance Replace Fuser
Replace Laser
Replace PF Kit 1
Replace PF Kit 2
Replace PF Kit 3
Replace PF Kit MP
No Belt Unit Open the Front
Cover, pull out the
Drum Units
completely and
install the Belt Unit.
No Drum Install the Drum
Unit Unit.
No HUB No HUB Support.
Support
No Paper -
No Paper T1 -
No Paper T2 -
Middle line
Number of used pages for the
fuser unit has reached the upper
limit.
Number of pages printed with the
laser unit has reached the upper
limit.
Number of used pages for the PF
kit 1 has reached the upper limit.
Number of used pages for the PF
kit 2 has reached the upper limit.
Number of used pages for the PF
kit 3 has reached the upper limit.
Number of used pages for the PF
kit MP has reached the upper
limit.
The registration mark sensor
detected that no belt unit was set.
The current value between the
CHG and GRID terminals and the
toner sensor detected that there
were no toner cartridges of any
colors and detected that the drum
unit was not set.
USB HOST HUB connection
error
When paper was fed from the MP
tray, the MP paper empty sensor
detected that no paper was in the
MP tray.
For printing specifying Auto, it
was detected that no paper was
loaded in any of the paper trays.
When paper was fed from the
paper tray 1, the T1 paper feed
sensor detected that no paper
was in the paper tray 1.
When paper was fed from the T2
paper tray unit, the T2 paper feed
sensor detected that no paper
was in the T2 paper tray unit.
2-34
Error
State
Codes
4500
4600
5002
5003
5004
5001
6400
6200
9301
9306
9302
9303
Refer
to:
2-50
2-50
2-54
2-54
2-55
2-54
2-58
2-56
--- 4.11.2
2-72
2-74
2-72
2-73
Confidential