Table of Contents
Advertisement
■
Switching of ON/OFF of DirectPrint Color mode-Improve Gray Color
<Function>
This function is to switch ON/OFF of the print control for the gray color when other colors are
slightly blended in the gray color or the gray color is uneven upon printing.
LCD
DP.ImpGray=ON
DP.ImpGray=OFF
"*" is displayed at the end of the currently specified function in the LCD display.
<Operating procedure>
Model without touch panel
(1) Press the
"MAINTENANCE 45" on the LCD in the
initial state of the maintenance mode.
Then, press the OK key. "USBNo." is
displayed on the LCD.
(2) Press the
"DP.ImpGray" and then press the OK or
Go key.
(3) Press the
"DP.ImpGray=ON" or
"DP.ImpGray=OFF", and press the OK
or Go key.
(4) "Accepted" is displayed on the LCD,
and the machine returns to the initial
state of the maintenance mode.
DirectPrint Color mode - Improve Gray Color. (Print control for gray
color) ON (Improves the symptom that other colors are slightly
blended in the gray color.) (default)
DirectPrint Color mode - Improve Gray Color. (Print control for gray
color) OFF (Improves the unevenness of the gray color.)
or
key to display
or
key to display
or
key to select
5-24
Description
Model with touch panel
(1) Press the 4 and 5 keys in this order in
the initial state of the maintenance
mode. "USBNo." is displayed on the
LCD.
(2) Press the
or
"DP.ImpGray" and then press the Mono
or SET key.
(3) Press the
or
"DP.ImpGray=ON" or
"DP.ImpGray=OFF", and press the
Mono or SET key.
(4) "Accepted" is displayed on the LCD,
and the machine returns to the initial
state of the maintenance mode.
key to display
key to select
Confidential
Advertisement
Table of Contents
Troubleshooting
