Table of Contents
Advertisement
Error Message
1st line
-
Ignore Data
Jam 2-sided
Pull out Tray 1
completely. Check
inside the machine
or open the Back
Cover to remove
the jammed paper.
Jam Inside
Open the Front
Cover, pull out the
Drum Unit
completely and
remove the
jammed paper.
Jam MP Tray Remove the
jammed paper from
Multi Purpose Tray
and press Go.
Jam Rear
Open the Back
Cover and remove
the jammed paper,
then press Go.
Jam Tray 1
Remove the
jammed paper from
Tray 1.
Jam Tray 2
Remove the
jammed paper from
Tray 2.
2nd line
Undecodable data is found
during printing.
Undecodable PS data is received.
After the first side is printed in
2-sided printing mode, the
registration front sensor does not
detect paper pass after a set
period of time.
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
When the paper is fed from the
MP tray, after the MP registration
front sensor detects paper pass,
the registration rear sensor does
not detect paper pass after a set
period of time.
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
In the case of printing by feeding
paper from the paper tray 1, after
the T1 paper feed sensor detects
paper pass, the registration front
sensor does not detect paper
pass after a set period of time.
In the case of printing by feeding
paper from the T2 paper tray unit,
after the T2 paper feed sensor
detects paper pass, the
registration front sensor does not
detect paper pass after a set
period of time.
2-23
Error
State
Codes
7700
7000
7200
7100
7300
7400
Refer
to:
---
4.11.1
2-66
2-62
2-64
2-63
2-65
2-65
Confidential
Advertisement
Table of Contents
Troubleshooting
