Brother HL-L9300CDW Service Manual page 55

Error Message
Upper line
No Paper T3 -
No Function Locked
Permission
Function Locked.
Job Deleted. Press
Stop[x].
Open the Front
No Toner
Cover, then install
Toner Cartridge.
Black (BK).
Open the Front
Cover, then install
Toner Cartridge.
Cyan (C).
Open the Front
Cover, then install
Toner Cartridge.
Magenta (M).
Open the Front
Cover, then install
Toner Cartridge.
Yellow (Y).
No Tray -
No Tray T1
-
Middle line
When paper was fed from the T3
paper tray unit, the T3 paper feed
sensor detected that no paper
was in the T3 paper tray unit.
In the case of PC-print, the ID
which does not have permission
to perform color printing was
used.
In the case of Secure print or
USB Direct print, the ID which
does not have permission to
perform color printing was used.
The toner sensor detected that
no toner cartridge (Black) was
set.
The toner sensor detected that
no toner cartridge (Cyan) was
set.
The toner sensor detected that
no toner cartridge (Magenta) was
set.
The toner sensor detected that
no toner cartridge (Yellow) was
set.
While the T2 paper tray unit is
open state, print or adjustment
operation was attempted.
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(after the registration of printing in
the engine)
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(before the registration of
printing in the engine)
2-35
Error
State
Codes
9304
6101
6104
6103
6102
8402
8505
8501
Refer
to:
2-73
--- 4.10.3
--- 4.10.3
2-56
2-56
2-56
2-56
2-67
2-68
2-68
Confidential