Brother HL-L9300CDW Service Manual page 58

Error Message
Upper line
Specify the correct
Size Error
paper size for Tray
1.
Specify the correct
paper size for Tray
2.
Specify the correct
paper size for Tray
3.
Press Stop[x].
Size Error
Specify the correct
2-sided
paper and load the
same size paper as
the Printer driver
setting.
Specify the correct
paper and press
[Retry].
Reload correct
Size
paper in Tray1,
Mismatch
then press [Retry].
Reload correct
paper in MP Tray,
then press [Retry].
Reload correct
paper in Tray2,
then press [Retry].
Reload correct
paper in Tray3,
then press [Retry].
Middle line
For printing by feeding paper
from the paper tray 1, the size of
paper specified from the driver
set the size which was not
supported by the paper tray 1.
For printing by feeding paper
from the T2 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T2 paper tray
unit.
For printing by feeding paper
from the T3 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T3 paper tray
unit.
For 2-sided printing, the tray
whose paper size was not
supported by 2-sided printing
was selected.
The registration rear sensor
detected that the fed paper was
larger or smaller than the
specified size in 2-sided printing.
The size of paper loaded in the
paper tray 1 and the one
specified from the driver are not
same when paper is fed from the
paper tray 1.
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when paper is fed from the MP
tray.
The size of paper loaded in the
T2 paper tray unit and the one
specified from the driver are not
same when paper is fed from the
T2 paper tray unit.
The size of paper loaded in the
T3 paper tray unit and the one
specified from the driver are not
same when paper is fed from the
T3 paper tray unit.
2-38
Error
State
Codes
9702
9703
9704
9701
8A01
9002
9001
9003
9004
Refer
to:
2-75
2-75
2-75
2-75
2-69
2-71
2-71
2-71
2-71
Confidential