Mitsubishi Electric MELSEC iQ-R Series User Manual page 156

■Data names and subscripts in the continuous setting
The following shows how the data name is set by the "Change" and "Add subscripts" checkboxes.
Ex.
Data name = DATA
Start device = D0
Continuous setting total number = 3
Continuous setting interval = 1
For the above settings, devices are set as shown below.
Item
Change
Add subscripts
Data name
■Total number and interval in the continuous setting
Configure when setting devices by leaving a fixed interval.
Ex.
Data name = DATA (Add subscripts)
Start device = D0
Continuous setting total number = 3
Continuous setting interval = 10
For the above settings, devices are set as shown below.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
154
2.5 Data Logging Setting
Example 1
Unselected
Unselected
D0
D1
D2
Example 2
Selected
Unselected
DATA
DATA
DATA
Example 3
Selected
Selected
DATA(1)
DATA(2)
DATA(3)