Mitsubishi Electric MELSEC iQ-R Series User Manual page 44

■Time interval specification
A trigger occurs at the specified time interval (hour, minute, or second) from exactly midnight everyday, exact hour, or exact
minute.
The available time units and intervals are as follows:
Unit
Hour
Minute
Second
Only one unit and its interval can be specified to the time interval. When hour is specified to the unit, only one interval can be
specified from 1, 2, 3, 4, 6, 8, 12, and 24.
• When the time interval of 30 minutes is specified and powered ON at 10:15
Sampling interval
10:00
Power ON at 10:15
■Time specification
A trigger occurs at the specified time.
However, when the specified time and the data sampling timing do not match, a trigger occurs at the first time of data
sampling for which the specified time has elapsed.
The date and time that can be specified are as follows:
Unit
Month
Day
Hour
Minute
Second
When specifying every day, every hour, and every minute, set the respective values of date and time for every month, every
day, and every hour. (When every hour is set, set the value for every month and every day.)
• When every month, every day, every hour, 0 min., and 5 sec are specified.
Sampling interval
09:59:45 09:59:48
1 FUNCTION
42
1.1 Data Logging Function
Interval
1, 2, 3, 4, 6, 8, 12, 24
1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
10:30
Interval
1 to 12, every month
1 to 31, last day, every day
0 to 23, every hour
0 to 59, every minute
0 to 59
09:59:51 09:59:54 09:59:57
11:00 11:30
10:00:00 10:00:03 10:00:06
10:00:05
12:00
10:00:09 10:00:12 10:00:15