Mitsubishi Electric MELSEC iQ-R Series User Manual page 266

Error code Error name
18EDH to 18EFH High speed sampling error
18F0H to 18F1H High speed sampling error
18FAH to 18FCH File write error
1907H Layout type specification error
1909H Current value sampling device
information acquisition error
190AH Layout type specification error
190FH File read error
1915H Data type specified error
191EH Save file number excess error
191FH Number of saved files excess
error
1920H Directory creation error
1921H Rename error
192BH Output format specification error
192CH Data type specified error
1930H to 1931H Setting file error
1940H to 1943H Setting file error
194CH to 194DH Setting file error
4 TROUBLESHOOTING
264
4.4 Error Code List
Error description
• Module operation is executed by more than one
location at the same time.
• Failed to execute the high speed sampling.
Failed to execute the high speed sampling.
Failed to write the file.
An invalid layout type has been specified.
Or the report setting file is corrupted.
An invalid current value sampling device has been
set.
Or the current value sampling device information
cannot be obtained because the report setting file
is corrupt.
An invalid layout type has been specified.
Or the report setting file is corrupted.
Failed to read the file.
An invalid data type has been specified.
Or the report setting file is corrupted.
The saved file number exceeded FFFFFFFF.
The number of saved files has reached the upper
limit.
Failed to create the directory.
Failed to rename.
An invalid output format has been specified.
Or the report setting file is corrupted.
An invalid data type has been specified.
Or the report setting file is corrupted.
There is no setting file.
Or the setting file is corrupted.
There is no setting file.
Or the setting file is corrupted.
There is no setting file.
Or the setting file is corrupted.
Corrective action
• Execute update settings again.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Delete all the saved files on the SD memory
card.
• Clear the files by the SD memory card
diagnostics of the Configuration Tool.
• Replace the SD memory card.
• Delete all the saved files on the SD memory
card.
• Clear the files by the SD memory card
diagnostics of the Configuration Tool.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Check if the data logging file is being deleted
before the report is output.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Check if the power turned OFF or reset the
programmable controller CPU without stopping
file access.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.