Mitsubishi Electric MELSEC iQ-R Series User Manual page 174

Name_date_time_sequential number
*2 When selecting only "Add the name" in the simple setting or setting only fixed string for the "Format" in the detailed setting, a file with a
same name can continue to be created by setting the number of saved files to 1. (When the number of saved files is set to a value other
than 1, a file with a same name is created and the INFO LED turns ON.)
However, when switching, the files are overwritten, and thus, the name cannot be added to an existing file.
*3 When writing the setting after changing the saved file name setting, updating the setting, or powering OFF  ON, the accumulating file
used before changing the setting is switched and a new accumulating file is created.
*4 The number of "<DATA1>" and "<DATA2>" that can be set in the format is one for each.
*5 A reserved word quoted with double quotes (") is added as a string to the file name. A double quote (") itself is not added to the file name
as a string.
The reserved word "<DATA1>" and "<DATA2>" cannot be added to the file name as a string.
*6 The following abbreviations are output for days of the week.
Monday: Mon, Tuesday: Tue, Wednesday: Wed, Thursday: Thu, Friday: Fri, Saturday: Sat, Sunday: Sun
*7 The data sampled at the time when the folder switching conditions are satisfied is added to the file name.
If the data cannot be sampled at the time of a file switching, the data sampled right before the file switching is added.
When the sampled data does not exist, "NODATA" (fixed string) is added to the saved file name.
*8 When the number of digits of data to be output is less than the specified number of digits, the data is zero-padded by specifying "Zero-
padding" on the "Output format" screen.
*9 The number of seconds of the date/time to be added must be even. If the file creation time is an odd number, it will be reduced by one
second, and rounded to the even number.
*10 If Word [Signed], Double Word [Signed] is specified to the data type, the negative values may be output depending on the device value
of the CPU module. When negative values are output, the information that has one more character than the number of characters of
output example is added since '-' is added.
Transfer setting
Window
Click the [Transfer settings] button on the [File] tab of the data logging setting screen.
Displayed items
Item
File transfer
E-mail sending
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
172
2.5 Data Logging Setting
Transfer files to the 
following destination
Transfer destination 1.
to 3.
[Editing file transfer
setting] button
E-mail files to the 
following destination
E-mail address 1. to 3.
[Editing e-mail setting]
button
[E-mail content setting]
button
Description
Select this to transfer a file to FTP servers or a shared folder.
Select the file transfer destination from the destinations that are registered on
the "File transfer setting" screen.
Displays the "File transfer setting" screen.
Page 136 File transfer setting
Select this to attach a file to an e-mail and send it.
Select e-mail destinations from the destination group registered on the "E-mail
setting" screen.
Displays the "E-mail setting" screen.
Page 139 E-mail setting
Displays the "E-mail content setting" screen.
Page 173 E-mail content setting