Connection To The Data Terminal - Panasonic KX-T336 System Reference Manual

-". -,."'
.\-
.) .- .\\
.
3.02 Connection to the Data Terminal
Serial Interface
(RS232C)
l
Connect the RS-232C connector of the data terminal to the "PROG".
l
Cables must be shielded and the maximum length of the cable is 6.5 feet.
0
'
.
/
0
e
. /
I
l
Connection Chart
RS-232C sort (PROG) on the Basic Shelf
\
Panasonic data terminal ; KX-D4930, etc.
If you connect this unit to a Panasonic Data Terminal, the Communication Parameter
Transmit XON/XOFF on the Data Terminal must be set to "YES."
For further details, see the Operating Instructions of the Data Terminal.
2-D-6