Panasonic KX-T336 System Reference Manual page 471

Operation
Recording OGM from PITS (For Operation from
Attendant Console. refer to Section 6-J-8.00
Wgoing Message (OGM) Recording and Playing
Back.-)
1.
3.
rl
4.
lrl
YYQII
Lff the handset or press the SP-
PHONE button.
5 You hear dial tone 1 or 3 or 4.
Dial the feature number for OGM
Record 791" (default) and the
resource number (1 to 4) in
succession.
(Resource number)
1 : OGMl for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
l
The MEMORY indicator flashes
in red 60 wink, confirmation tone
3 is heard.
l
ff your PITS has a display, it
shows:
xxxxxxxx Rec. : 00
I 7
t
Indicates recording
time, counts up by
second.
UCD-OGMl or
^ UCD-OGM2 or .z' -
DISA-OGM or WkupOGM
Begin your message.
As soon as you finish, press the
MEMORY button.
l
The MEMORY indicator lights in
red.
l
After confirmation tone 3
sounds, the recorded message
is played back automatically.
r-l +z,
If your PITS has a display, it
shows:
xxxxxxxx Play : 00
I
T +
Indicates playback
time, counts up by
second.
UCD-OGMl or
UCD-OGMP or
DISA-OGM or Wkup-OGM
When playback is finished, the
MEMORY indicator goes out.
You hear confirmation tone 3,
then no tone.
5. Replace the handset or press the
SP-PHONE button.
L I
(Supplement) -
In step 3 ff 30 seconds is over, recording is
terminated and piayback starts automatically.
Accordingly, it is not necessary to execute step 4
aftenrvard.
. .
In step 3 if you wish to change the message
during recording, you can start recording again
by dialing * ."
In sfep 4 if you wish to interrupt and finish
playback, press the MEMORY button.
4-l-26
(40993)