Panasonic KX-T336 System Reference Manual page 631

F. Holding Features
1 .OO Hold
Description
AlI~ws me attendam :o hold the current call
teTranIy &y pressing the HOLD key.
This rs effectrve only for a call on the SRC side of
a LOOP key.
A call on the DES side of the LOOP key can not
be placed on hold.
To place a call on hold, press the HOLD key.
To retrieve a held call. press the LOOP key in
holding status.
Programming
None
Conditions
Up to six calls can be placed on hold at the
attendant console.
Calls held by the attendant console can not be
retrieved by other extensions.
Holding the other attendant console and
doorphone calls is impossible.
If a held call has nofbeen answered more than a
pre-assigned time, transfer recall tone may
sound at attendant console.
Refer to Section 3-E-2.00 "Held Call Reminder'
for further information.
If a held call is not answered for more than 30
minutes, it will be disconnected automatically.
Operation
Holding a call
During a conversation with an outside or inside
patty, the SRC indicator of the corresponding
LOOP key is lit.
UOLO
El
0
1. Press the HOLD key.
l
The other party is placed on
hold. The SRC indicator of the
corresponding LOOP key starts
flashing in 60 wink.
l
The DES indicator of that
LOOP key lights, and dial tone
sounds.
Retrieving a held call
The SRC indicator is flashing and the DES
indicator is iii.
m DES
rl
1. Press the LOOP key in holding
m SRC
status.
LEZU .
.
Conversation with the SRC
side party is established.
The SRC indicator of the
corresponding LOOP key is lii,
the DES indicator light goes
Out.
6-F-l