Panasonic KX-T336 System Reference Manual page 411

Operation
Setting Call Forwarding-No Answer
1.
Lift the handset or press
the SP-PHONE button.
WOiDNO
n
2.
GHI
•l
4
3.
Press the FWD/DND button, then
dial "4."
Or, dial the feature number for
"Call Forwarding-No Answer Set."
Dial the directory number of the
extension or the Voice Mail port,
or "FDN for General Operator
Call" to be set as the destination.
You hear confirmation tone 1 or
2 and then dial tone 1 or 3 or 4.
If your PITS has a display, it
shows:
When setting an extension as
the destination:
FWD (NA) Ext xxxx
-T
Directory number:
three or four digits
When setting operators as the
destination:
If an operator is Attendant -.>+
Console
1 FWD (NA) ATT
I
If an operator is extension
FWD (NA) Ext xxxx 1
3-
Directory number:
three or four digits
rl
,x,
4. Replace the handset or press the
SP-PHONE button.
l
The indicator on the FWD/DND
button starts flashing.
FWODNO
El
2.
QW
/o/
0
l-l
qq
3.
I' * :he handset or press
-. .
::e SP-PHONE button.
- The indicator light flashing on
!he
FWD/DND button goes out.
Press the FWDIDND button, then
dial "0."
Or, dial the feature number for
' Call Forwarding/Do Not Disturb
Cancel."
. You hear confirmation tone 1 or
2 and then dial tone 1 or 3 or 4.
l
If your PITS has a display, it
shows:
FWD/DND Cancel
Replace the handset or press the
SP-PHONE button.
I
I
(Supplement)
Type 50 and KX-T7050 PITS telephones are not
provided with the FWD/DND button.. Only the PF3
button on them can be programmed to be the
FWD/DND button.
Refer to Section 9-G-l .03 "Station (3/3)" and
Section 12-C-2.00 "PF Button Assignment" for
further information.
1 I
4-F-l 4
(21292)