Panasonic KX-T336 System Reference Manual page 388

Placing a call on Consuitation Hold on twc DN
buttons
1.
Press the TRANSFER or CONF
button.
I
or l
The DN button in use is still lit
CCNF
El
in green, you hear confirmation
tone 2 then dial
tone 1 or 3 or
n 4.
l
The call is placed on
Consultation Hold.
El
2. Press another DN or CO button.
l
The pressed button lights in
green, you hear dial tone 1 or 3
or 4.
You can call another party from
the seleoted DN or CO button.
l
The DN button where a call
has been held changes from
being lit in green to flashing in
green 120 wink.
Retrieving a call on Consuttation Hold (1)
You placed a call on Consultation hold and press
another DN or CO button.
1. Replace the handset or press the
SP-PHONE button.
l
The indicator light on the
pressed DN or?0 button goes
Out.
l
Consul&&en Hold Recall starts.
2.
Lift the handset or press the SP-
PHONE button.
Retrieving a call on Consultation Hold (2)
You have placed a call on Consultation Hold and
are talking on another
DN or
CO button.
-mAreFER
q
1. Press the TRANSFER or CONF
button.
or
l
A call on Consultation Hold is
0
63
retrieved and you can talk to
the retrieved pa;ty.
l
The DN or CO button changes
from flashing in green 120 wink
to being lit in green.
l
Another party in conversation
is placed on Consultation Hold
and the DN button changes
from being lit in green to
flashing in green 120 wink.
Retrieving a call on Consultation Hold (3)
You have placed a call on Consukation Hold and
are talking on another DN or CO button.
1. Press the DN or CO button
where the call has been held and
flashing in green 120 wink.
A call on Consultation Hold is
retrieved and you can talk to
the retrieved party.
The DN or CO button changes
from flashing in green 120 wink
to being lit in green.
Another call is disconnected
and the,green indicator light on
the button goes out.
I- I
l A
call on Consultation Hold is
retrieved You can talk to the
Party
l
The DN button changes from
flashing in 120 wink to being lit
in green.
4-E-4