Panasonic KX-T336 System Reference Manual page 664

1.02 Switching of Day/Night Mode
Description
It is assignable to switch Day/Night mode either
automatically at pre-assigned time or manually
by the Operator
1
(Attendant Console or
Extension) at any time desired.
If Manual Switching mode is selected, the
attendant assigned as Operator 1 can switch day
mode to night and vice versa by pressing the
NIGHT key.
To utilize Manual Switching mode, set "System-
Operation (3/3)" Night Service to "Manual."
Operation
Changing DAY mode to NIGHT mode
While the NIGHT key indicator is off,
1. Press the NIGHT key for more
than one second.
l
The indicator on the NIGHT key
lights.
l
The system is now in NIGHT
mode.
The attendant assigned as Operator
1,
however,
can override the Auto Mode setting, that is
Manual Mode is established, by dialing the
feature number for "Night Service Manual Mode
Set." To restore the Auto mode, dial the feature
number for "Night Service Manual Mode Cancel."
Programming
System Programming
Reference
VT
Dumb
"System-Operation (3/3)",
9-D-i
.03 10-C-4.00
Night Service
Auto Start Time
'System-Tenant", 9-D-2.00 1 O-C-5.00
Night Service (Tenant 2)
Auto Start Time
"System-Numbering Plan (8/g)", 9-D-6.08 iO-C-10.00
Night Mode Set
Night Mode Cancel
Night Service Manual Mode
Set
Night Service Manual Mode
Cancel
Conditions
If tenant service is employed, night service
assignment unique to each tenant (Tenant
1
and
Tenant 2) can be programmed individually.
In this case, the assignment in "System-
Operation (3/3)" is applied to Tenant 1 and the
assignment in "System-Tenant" is applied to
Tenant 2.
Changing NIGHT mode to DAY mode
While the NIGHT key indicator is lit in green,
rl K)
1. Press the NIGHT key for more
than one second.
I I
l
The indicator light on the
NIGHT key goes out.
l
The system is now in,DAY
mode.
Changing to "Manual" mode from "Auto" mode
/o/
1.
Press an idle LOOP key.
LOOP
I
I .a
2. Dial the feature number for "Night
Service Manual Mode Set."
l
The following message appears
on the message line:
1 Messaae: Niaht Service Manual Mode Set 1
Changing to "Auto" mode from "Manual" mode
/o/
1. Press an idle LOOP key.
LOOP
I 8
2. Dial the feature number for "Night
Service Manual Mode Cancel."
l
The following message appears
on the message line:
Message:
Night Service Manual Mode Cancel
6-J-5