Panasonic KX-T336 System Reference Manual page 297

Note:
.
Assrgn "CO Accxs Instantly (CAI)" feature to "Yes" on a trunk group by
entering the
CAI
command.
This feature is programmable on
a
rrunk group
basis.
In case of Local Trunk Dial Access, the system decides the mode by the
top trunk group of Local Trunk Hunt Sequence.
Refer to Section 1 O-C-58.00 "CO Access instantly (CAI)" for further
information.
' * *
Set
the
WSO
(Waiting
Second Dial tone) mode to "Yes" by entering the
WS3 command.
Refer to Section I O-C-53.00 "World Select 3 (WS3)" for further
information.
I- a Assign "External First Digit Time-out" timer longer than a delayed timing
of the second dial tone from Central Office.
I* ti Register the required area code and pause time by entering the WSD
command.
Refer to
Section
1
O-C-61 .OO "Waiting for Second Dial tone (WSD)" for
further information
Programming
System Programming
"System--System Ttmef,
External First Digit Time-Out
"World Selecf 3 (WS3)"
"CO Access Instantly (CAI)" _.
"Waiting Second Dial Tone (WSD)"
Conditions
External First Digit Time-Out
This timer is usually used to set the waiting time albwed between CO dial
tone or pseudo dial tone and the lime-out first digit dialed.
However, if the WSD feature is utilized by system programming, this timer
works to set the waiting time atbwed between area code dialed and the
remaining number dialed.
3-F-63
(30393)