Advertisement
20
. Raise needle and presser foot to
the highest
position.
With
left
hand,
hold
the
end
of upper
thread and with right hand, turn
balance wheel toward you until
the needle moves down and up
again to its highest position.
. Now
upper
thread
catches
the
lower thread ina loop. Pull thread
toward you so that lower thread
will come up in a large loop from
the presser foot.
. Pull both threads under the toes
of presser foot and place them to
the rear leaving about 10 cm (4
inch).
1. Levante el pisa contura y suba la
aguja al maximo, gire el volante
hacia usted hasta que la aguja ba-
je y nuevamente suba cogiendo
asi el hilo inferior.
2. Hale suavemente hacia usted del
hilo que esta sosteniendo
y el hilo
inferior saldrá con el.
3. Coloque los extremos de los hi-
los bajo el pisacostura, póngalos
hacia atrás dejando alrededor de
10 cm (4 pulgada).
Advertisement
