Configuring Serial And Terminal Modes; Configuring Ipmi And Idrac6 Serial - Dell IDRAC6 User Manual

Table 5-7. Management Station COM Port Settings
Setting Description
Bits per second
Data bits
Parity
Stop bits
Flow control

Configuring Serial and Terminal Modes

Configuring IPMI and iDRAC6 Serial

1 Expand the System tree and click Remote Access.
2 Click the Network/Security tab and then click Serial.
3 Configure the IPMI serial settings.
See Table 5-8 for description of the IPMI serial settings.
4 Configure the iDRAC6 serial settings.
See Table 5-9 for description of the iDRAC6 serial settings.
5 Click Apply Changes.
6 Click the appropriate Serial page button to continue. See Table 5-10 for
description of the serial configuration page settings.
Table 5-8. IPMI Serial Settings
Setting
Connection Mode
Settings
Baud Rate
106
Advanced iDRAC6 Configuration
Required Setting
57600
8
None
1
Hardware
Description
• Direct Connect Basic Mode - IPMI Serial Basic Mode
• Direct Connect Terminal Mode - IPMI Serial Terminal Mode
• Sets the data speed rate. Select 9600 bps, 19.2 kbps, 57.6 kbps,
or 115.2 kbps.